CC cotton canvas layered conveyor belt

Performance description:A traditional conveyor belt suitable for short and medium distance transport materials.
Features: Skeleton force body are cotton canvases (both vertical and horizontal are cotton or polyester), suitable for the general conditions of the delivery of block, granular, powdery materials and packed products or in heat-resistant environments with excellent performance. Good fatigue resistance, the use of elongation is small , suitable for large slope transportation of materials.
Markets: distribution occasions, baggage handling, bulk transit stations, cement, coal mines, foundry, grain, quarries, parcel delivery, timber, sand, steel mills.
Application location: washing coal plant, wood treatment, wood handling, main conveyor line, pit channel transport, primary crushing line, secondary crushing line, unloading machine, waste disposal and environmental recovery, stacking conveyor.
Stretch strength: 168 to 800N/mm Width: 500 to 2400mm.
Conveyor belt features and advantages:
1. the smaller elongation canvas structure longitude and latitude both are made of polyester cotton fiber , low elongation, good adhesion. Under high temperature conditions, deformation is small, suitable to use for short distance, small conveyor amount occasion, conveyor belt is from the cotton conveyor belt quality upgrade products, its anti-pull body using longitudinal blending fiber and latitude cotton fiber interweaving, the performance is better than the whole cotton conveyor belt, especially the belt body thinner, lighter, impact-resistant performance greatly improved. Suitable for transporting materials over short distances and medium loads.
2.  cover adhesive type and thickness can have a variety of choices for different applications, Qingdao Juhang fabric core conveyor belt with a variety of cover adhesive  type and thickness to choose from.

conveyor belt square meter measurement method：

ST series：m²=belt width m x belt thickness x belt length m

layered：m²=belt width m x ｛fabric layers+ ( upper cover layer mm+  lower cover layer mm)/1.5mm）x belt length m

calculation formula od mass per unit length of conveyor belt:

kg/m²=quality of each fabric layer kg/m² x number of layers+specific gravity of cover layer x ｛ upper cover layer thickness mm + lower cover layer thickness mm｝

•1.225/ in the formula, the specific gravity of flame retardant type of cover adhesive is 1.225。

1.125/ ordinary type is 1.125

other types refer to ordinary type